Citroen DS4 1.6 BlueHDI 120 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Citroen DS4 1.6 BlueHDI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS4 1.6 BlueHDI 120 hp ECU
Citroen DS4 (2010) 1.6 BlueHDI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 120 to 140 hp (+20 hp, +17%) and torque from 300 to 355 Nm (+55 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). Mid-range Citroen diesels are a mainstream chip tuning subject.
The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Citroen DS4 1.6 BlueHDI 120 hp increase after Stage 1?
After Stage 1 the power of the Citroen DS4 1.6 BlueHDI 120 hp rises from 120 to 140 hp, a gain of 20 hp (+17%). Torque rises from 300 to 355 Nm (+55 Nm).
How does Stage 1 differ from stock on the Citroen DS4?
Stage 1 on the Citroen DS4 1.6 BlueHDI 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 BlueHDI 120 hp?
Stage 1 on the Citroen DS4 1.6 BlueHDI 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen DS4 1.6 BlueHDI 120 hp?
Stage 2 on the Citroen DS4 1.6 BlueHDI 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen DS4 1.6 BlueHDI 120 hp run?
The control unit of the Citroen DS4 1.6 BlueHDI 120 hp is the Bosch EDC17C60. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen DS4?
Stage 1 on the Citroen DS4 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen DS4 1.6 BlueHDI 120 hp done?
The full remap cycle for the Citroen DS4 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen DS4?
The original Citroen DS4 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen DS4 1.6 BlueHDI 120 hp?
The cost of Stage 1 for the Citroen DS4 1.6 BlueHDI 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.