Citroen DS3 1.6 THP 207 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Citroen DS3 1.6 THP 207 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS3 1.6 THP 207 hp ECU
Citroen DS3 (2009) 1.6 THP 207 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 207 to 230 hp (+23 hp, +11%) and torque from 285 to 340 Nm (+55 Nm). ECU — Bosch MED17.4.2. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. High-output Citroen petrol engines are rare, as the focus is on the family segment.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. High-output Citroens are rare, as the core segment is low and mid.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen DS3 1.6 THP 207 hp?
After Stage 1 the power of the Citroen DS3 1.6 THP 207 hp rises from 207 to 230 hp, a gain of 23 hp (+11%). Torque rises from 285 to 340 Nm (+55 Nm).
How does Stage 1 differ from stock on the Citroen DS3?
Stage 1 on the Citroen DS3 1.6 THP 207 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +23 hp with no hardware changes.
What does Stage 1 give on the powerful Citroen DS3 1.6 THP 207 hp?
The high-output Citroen DS3 1.6 THP 207 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Citroen DS3 1.6 THP 207 hp?
Stage 2 on the Citroen DS3 1.6 THP 207 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen DS3 1.6 THP 207 hp run?
The control unit of the Citroen DS3 1.6 THP 207 hp is the Bosch MED17.4.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen DS3?
Stage 1 on the Citroen DS3 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen DS3 1.6 THP 207 hp done?
The full remap cycle for the Citroen DS3 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen DS3?
The original Citroen DS3 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen DS3 1.6 THP 207 hp?
The cost of Stage 1 for the Citroen DS3 1.6 THP 207 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.