Citroen DS3 1.6 HDI 92 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Citroen DS3 1.6 HDI 92 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS3 1.6 HDI 92 hp ECU
Citroen DS3 (2009) 1.6 HDI 92 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 92 to 115 hp (+23 hp, +25%) and torque from 230 to 270 Nm (+40 Nm). ECU — Bosch EDC17C10. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Low-output Citroen diesels are city units, and Stage 1 is safe.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen DS3 1.6 HDI 92 hp?
After Stage 1 the power of the Citroen DS3 1.6 HDI 92 hp rises from 92 to 115 hp, a gain of 23 hp (+25%). Torque rises from 230 to 270 Nm (+40 Nm).
How does Stage 1 differ from stock on the Citroen DS3?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen DS3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +23 hp with no hardware changes.
Is Stage 1 worth doing on the base Citroen DS3?
Stage 1 on the base Citroen DS3 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Citroen DS3 1.6 HDI 92 hp?
Stage 2 on the Citroen DS3 1.6 HDI 92 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Citroen DS3 1.6 HDI 92 hp use?
The Citroen DS3 1.6 HDI 92 hp is fitted with the Bosch EDC17C10 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen DS3 remain valid after Stage 1?
After remapping the Citroen DS3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen DS3?
Reading and writing via OBD takes 25-30 minutes on the Citroen DS3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen DS3?
Before Stage 1 the original of the Citroen DS3 1.6 HDI 92 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen DS3 1.6 HDI 92 hp cost?
The remap price for the Citroen DS3 1.6 HDI 92 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.