Citroen DS3 1.6 BlueHDI 120 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Citroen DS3 1.6 BlueHDI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS3 1.6 BlueHDI 120 hp ECU
Citroen DS3 (2009) 1.6 BlueHDI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 120 to 140 hp (+20 hp, +17%) and torque from 300 to 355 Nm (+55 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
Stage 1 on Citroen diesels delivers a noticeable torque gain. The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Citroen DS3 1.6 BlueHDI 120 hp reach after a remap?
The Stage 1 gain for the Citroen DS3 1.6 BlueHDI 120 hp is 20 hp (+17%) over the stock 120 hp, for a total of 140 hp. Torque rises from 300 to 355 Nm (+55 Nm).
What is Stage 1 chip tuning for the Citroen DS3?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen DS3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen DS3 1.6 BlueHDI 120 hp?
A remap of the Citroen DS3 1.6 BlueHDI 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen DS3 1.6 BlueHDI 120 hp?
Stage 2 on the Citroen DS3 1.6 BlueHDI 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Citroen DS3 1.6 BlueHDI 120 hp use?
The Citroen DS3 1.6 BlueHDI 120 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen DS3 remain valid after Stage 1?
After remapping the Citroen DS3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen DS3?
Reading and writing via OBD takes 25-30 minutes on the Citroen DS3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen DS3?
Before Stage 1 the original of the Citroen DS3 1.6 BlueHDI 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen DS3 1.6 BlueHDI 120 hp cost?
The remap price for the Citroen DS3 1.6 BlueHDI 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.