Citroen DS3 1.4 HDI (citroen-ds3) 68 hp — Stage 1 file (+17 hp)
hp
Stage 1 file for Citroen DS3 1.4 HDI (citroen-ds3) 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen DS3 1.4 HDI (citroen-ds3) 68 hp ECU
Citroen DS3 (2009) 1.4 HDI (citroen-ds3) 68 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 68 to 85 hp (+17 hp, +25%) and torque from 160 to 200 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC16C0, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. DPF/SCR with AdBlue (BlueHDi) is standard on Euro-6 Citroen diesels.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. On naturally aspirated Citroen engines, the main effect is on throttle response. Low-output Citroen engines are city units, and Stage 1 is safe.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp?
Stage 1 chip tuning on the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp boosts engine output by 17 hp: from 68 to 85 hp. Torque rises from 160 to 200 Nm (+40 Nm).
What changes in the Citroen DS3 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen DS3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +17 hp with no hardware changes.
Is Stage 1 worth doing on the base Citroen DS3?
Yes, Stage 1 on the low-output Citroen DS3 1.4 HDI (citroen-ds3) 68 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp?
Stage 2 for the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp built with?
The Citroen DS3 1.4 HDI (citroen-ds3) 68 hp comes with 4 ECU variants: Bosch EDC16C0, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen DS3 remain valid after Stage 1?
After remapping the Citroen DS3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen DS3?
Reading and writing via OBD takes 25-30 minutes on the Citroen DS3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen DS3?
Before Stage 1 the original of the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp cost?
The remap price for the Citroen DS3 1.4 HDI (citroen-ds3) 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.