Citroen C5 1.6 BlueHDI 120 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Citroen C5 1.6 BlueHDI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C5 1.6 BlueHDI 120 hp ECU
Citroen C5 (2012) 1.6 BlueHDI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 120 to 140 hp (+20 hp, +17%) and torque from 300 to 355 Nm (+55 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. A diesel built in 2012 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Mid-range Citroen diesels are a mainstream chip tuning subject.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Citroen C5 1.6 BlueHDI 120 hp?
Stage 1 chip tuning on the Citroen C5 1.6 BlueHDI 120 hp boosts engine output by 20 hp: from 120 to 140 hp. Torque rises from 300 to 355 Nm (+55 Nm).
What changes in the Citroen C5 ECU after Stage 1?
Stage 1 on the Citroen C5 1.6 BlueHDI 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 BlueHDI 120 hp?
Stage 1 on the Citroen C5 1.6 BlueHDI 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen C5 1.6 BlueHDI 120 hp?
Stage 2 for the Citroen C5 1.6 BlueHDI 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Citroen C5 1.6 BlueHDI 120 hp run?
The control unit of the Citroen C5 1.6 BlueHDI 120 hp is the Bosch EDC17C60. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen C5?
Stage 1 on the Citroen C5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen C5 1.6 BlueHDI 120 hp done?
The full remap cycle for the Citroen C5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen C5?
The original Citroen C5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen C5 1.6 BlueHDI 120 hp?
The cost of Stage 1 for the Citroen C5 1.6 BlueHDI 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.