Citroen C4 2.0 HDI 163 hp — Stage 1 file (+27 hp)
hp
Stage 1 file for Citroen C4 2.0 HDI 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C4 2.0 HDI 163 hp ECU
Citroen C4 (2010) 2.0 HDI 163 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 163 to 190 hp (+27 hp, +17%) and torque from 340 to 400 Nm (+60 Nm). This engine ships with different ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2010 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What is the Stage 1 effect on the Citroen C4 2.0 HDI 163 hp?
Stage 1 chip tuning on the Citroen C4 2.0 HDI 163 hp boosts engine output by 27 hp: from 163 to 190 hp. Torque rises from 340 to 400 Nm (+60 Nm).
What changes in the Citroen C4 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen C4 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +27 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen C4 2.0 HDI 163 hp?
A remap of the Citroen C4 2.0 HDI 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen C4 2.0 HDI 163 hp?
Stage 2 for the Citroen C4 2.0 HDI 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Citroen C4 2.0 HDI 163 hp built with?
The Citroen C4 2.0 HDI 163 hp comes with 3 ECU variants: Delphi DCM3.4(+), Delphi DCM3.5, Delphi DCM6.2C. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen C4 remain valid after Stage 1?
After remapping the Citroen C4, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen C4?
Reading and writing via OBD takes 25-30 minutes on the Citroen C4. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen C4?
Before Stage 1 the original of the Citroen C4 2.0 HDI 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen C4 2.0 HDI 163 hp cost?
The remap price for the Citroen C4 2.0 HDI 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.