Citroen C3 1.2 VTI Puretech 82 hp — Stage 1 file (+8 hp)
hp
Stage 1 file for Citroen C3 1.2 VTI Puretech 82 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C3 1.2 VTI Puretech 82 hp ECU
Citroen C3 (2020) 1.2 VTI Puretech 82 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 82 to 90 hp (+8 hp, +10%) and torque from 116 to 125 Nm (+9 Nm). This engine ships with different ECU variants: Valeo V46.11, Valeo V46.12, Valeo V46.13, Siemens/Continental V56.12. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 12 configurations · 4 ECU variants. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. Low-output Citroen petrol engines are naturally aspirated city units, so the gain is modest. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. PureTech is Citroen's badge for its turbo petrol engines.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Modern Citroens use Tricore TPROT protection, so a Bench read is required. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen C3 1.2 VTI Puretech 82 hp?
The Stage 1 gain for the Citroen C3 1.2 VTI Puretech 82 hp is 8 hp (+10%) over the stock 82 hp, for a total of 90 hp. Torque rises from 116 to 125 Nm (+9 Nm).
What is Stage 1 chip tuning for the Citroen C3?
Stage 1 chip tuning of the Citroen C3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +8 hp with no hardware changes.
What does chip tuning give on the low-output Citroen C3 1.2 VTI Puretech 82 hp?
Stage 1 on the base Citroen C3 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How much does Stage 2 add on the Citroen C3?
Stage 2 on the Citroen C3 1.2 VTI Puretech 82 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Citroen C3 1.2 VTI Puretech 82 hp?
The Citroen C3 1.2 VTI Puretech 82 hp was fitted with different ECUs depending on the year and trim: Valeo V46.11, Valeo V46.12, Valeo V46.13, Siemens/Continental V56.12. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Citroen C3 warranty after chip tuning?
The factory warranty of the Citroen C3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Citroen C3 take?
On the Citroen C3 1.2 VTI Puretech 82 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Citroen C3?
Yes, the original ECU firmware of the Citroen C3 1.2 VTI Puretech 82 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Citroen C3?
Stage 1 for the Citroen C3 1.2 VTI Puretech 82 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.