Citroen C3 1.2 THP Puretech 110 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen C3 1.2 THP Puretech 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C3 1.2 THP Puretech 110 hp ECU
Citroen C3 (2017) 1.2 THP Puretech 110 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 205 to 270 Nm (+65 Nm). This engine ships with different ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Citroen turbo petrol engines deliver a noticeable gain with Stage 1. PureTech is Citroen's badge for its turbo petrol engines.
The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen petrol engines gives a noticeable gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Citroen C3 1.2 THP Puretech 110 hp reach after a remap?
After Stage 1 the power of the Citroen C3 1.2 THP Puretech 110 hp rises from 110 to 145 hp, a gain of 35 hp (+32%). Torque rises from 205 to 270 Nm (+65 Nm).
How does Stage 1 differ from stock on the Citroen C3?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen C3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen C3 1.2 THP Puretech 110 hp?
A remap of the Citroen C3 1.2 THP Puretech 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen C3 1.2 THP Puretech 110 hp?
Stage 2 on the Citroen C3 1.2 THP Puretech 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Citroen C3 1.2 THP Puretech 110 hp built with?
The Citroen C3 1.2 THP Puretech 110 hp comes with 3 ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen C3 remain valid after Stage 1?
After remapping the Citroen C3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen C3?
Reading and writing via OBD takes 25-30 minutes on the Citroen C3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen C3?
Before Stage 1 the original of the Citroen C3 1.2 THP Puretech 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen C3 1.2 THP Puretech 110 hp cost?
The remap price for the Citroen C3 1.2 THP Puretech 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.