Citroen C3 1.4 HDI (citroen c3) 68 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Citroen C3 1.4 HDI (citroen c3) 68 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C3 1.4 HDI (citroen c3) 68 hp ECU
Citroen C3 (2003) 1.4 HDI (citroen c3) 68 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 68 to 90 hp (+22 hp, +32%) and torque from 160 to 210 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC16C0, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2003 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
The Citroen community in France and Western Europe has a large pool of Stage files. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What power gain do you get after chip tuning the Citroen C3 1.4 HDI (citroen c3) 68 hp?
After Stage 1 the power of the Citroen C3 1.4 HDI (citroen c3) 68 hp rises from 68 to 90 hp, a gain of 22 hp (+32%). Torque rises from 160 to 210 Nm (+50 Nm).
How does Stage 1 differ from stock on the Citroen C3?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen C3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
Is Stage 1 worth doing on the base Citroen C3?
Stage 1 on the base Citroen C3 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Citroen C3 1.4 HDI (citroen c3) 68 hp?
Stage 2 on the Citroen C3 1.4 HDI (citroen c3) 68 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Citroen C3 1.4 HDI (citroen c3) 68 hp built with?
The Citroen C3 1.4 HDI (citroen c3) 68 hp comes with 4 ECU variants: Bosch EDC16C0, Bosch EDC16C34, Bosch EDC17C10, Siemens/Continental SID806. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Citroen C3 remain valid after Stage 1?
After remapping the Citroen C3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen C3?
Reading and writing via OBD takes 25-30 minutes on the Citroen C3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen C3?
Before Stage 1 the original of the Citroen C3 1.4 HDI (citroen c3) 68 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen C3 1.4 HDI (citroen c3) 68 hp cost?
The remap price for the Citroen C3 1.4 HDI (citroen c3) 68 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.