Citroen C3 Aircross 1.5 BlueHDI 110 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Citroen C3 Aircross 1.5 BlueHDI 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen C3 Aircross 1.5 BlueHDI 110 hp ECU
Citroen C3 Aircross (2021) 1.5 BlueHDI 110 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 130 hp (+20 hp, +18%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2021 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. The Citroen diesel range is fully shared with Peugeot, Opel and DS within Stellantis.
Modern Citroens use Tricore TPROT protection, so a Bench read is required. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Citroen C3 Aircross 1.5 BlueHDI 110 hp reach after a remap?
The Stage 1 gain for the Citroen C3 Aircross 1.5 BlueHDI 110 hp is 20 hp (+18%) over the stock 110 hp, for a total of 130 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Citroen C3 Aircross?
Stage 1 on the Citroen C3 Aircross 1.5 BlueHDI 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 BlueHDI 110 hp?
Stage 1 on the Citroen C3 Aircross 1.5 BlueHDI 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen C3 Aircross 1.5 BlueHDI 110 hp?
Stage 2 on the Citroen C3 Aircross 1.5 BlueHDI 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen C3 Aircross 1.5 BlueHDI 110 hp run?
The control unit of the Citroen C3 Aircross 1.5 BlueHDI 110 hp is the Bosch MD1CS003. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen C3 Aircross?
Stage 1 on the Citroen C3 Aircross voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen C3 Aircross 1.5 BlueHDI 110 hp done?
The full remap cycle for the Citroen C3 Aircross — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen C3 Aircross?
The original Citroen C3 Aircross ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen C3 Aircross 1.5 BlueHDI 110 hp?
The cost of Stage 1 for the Citroen C3 Aircross 1.5 BlueHDI 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.