Citroen Berlingo 1.6 BlueHDI 75 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen Berlingo 1.6 BlueHDI 75 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Berlingo 1.6 BlueHDI 75 hp ECU
Citroen Berlingo (2018) 1.6 BlueHDI 75 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 75 to 110 hp (+35 hp, +47%) and torque from 230 to 300 Nm (+70 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A modern diesel built in 2018 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. The factory calibration on Citroen diesels is conservative, leaving headroom for Stage 1.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. Modern Citroens use Tricore TPROT protection, so a Bench read is required. The Citroen community in France and Western Europe has a large pool of Stage files. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Citroen Berlingo 1.6 BlueHDI 75 hp reach after a remap?
The Stage 1 gain for the Citroen Berlingo 1.6 BlueHDI 75 hp is 35 hp (+47%) over the stock 75 hp, for a total of 110 hp. Torque rises from 230 to 300 Nm (+70 Nm).
What is Stage 1 chip tuning for the Citroen Berlingo?
Stage 1 on the Citroen Berlingo 1.6 BlueHDI 75 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is Stage 1 safe for the low-output Citroen Berlingo 1.6 BlueHDI 75 hp?
Stage 1 on the base Citroen Berlingo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Citroen Berlingo 1.6 BlueHDI 75 hp?
Stage 2 on the Citroen Berlingo 1.6 BlueHDI 75 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen Berlingo 1.6 BlueHDI 75 hp run?
The control unit of the Citroen Berlingo 1.6 BlueHDI 75 hp is the Bosch EDC17C60. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen Berlingo?
Stage 1 on the Citroen Berlingo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Berlingo 1.6 BlueHDI 75 hp done?
The full remap cycle for the Citroen Berlingo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Berlingo?
The original Citroen Berlingo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Berlingo 1.6 BlueHDI 75 hp?
The cost of Stage 1 for the Citroen Berlingo 1.6 BlueHDI 75 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.