Citroen Berlingo 1.5 BlueHDI 100 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Citroen Berlingo 1.5 BlueHDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Berlingo 1.5 BlueHDI 100 hp ECU
Citroen Berlingo (2018) 1.5 BlueHDI 100 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 100 to 130 hp (+30 hp, +30%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MD1CS003. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2018 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. Citroen shares platforms and engines with Peugeot, Opel/Vauxhall and DS within Stellantis. On modern Citroen diesels (encrypted BlueHDi), Bench is often needed.
Modern Citroens use Tricore TPROT protection, so a Bench read is required. ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much horsepower does Stage 1 add for the Citroen Berlingo 1.5 BlueHDI 100 hp?
The Stage 1 gain for the Citroen Berlingo 1.5 BlueHDI 100 hp is 30 hp (+30%) over the stock 100 hp, for a total of 130 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Citroen Berlingo?
Stage 1 on the Citroen Berlingo 1.5 BlueHDI 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 BlueHDI 100 hp?
Stage 1 on the Citroen Berlingo 1.5 BlueHDI 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Citroen Berlingo 1.5 BlueHDI 100 hp?
Stage 2 on the Citroen Berlingo 1.5 BlueHDI 100 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen Berlingo 1.5 BlueHDI 100 hp run?
The control unit of the Citroen Berlingo 1.5 BlueHDI 100 hp is the Bosch MD1CS003. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen Berlingo?
Stage 1 on the Citroen Berlingo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Berlingo 1.5 BlueHDI 100 hp done?
The full remap cycle for the Citroen Berlingo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Berlingo?
The original Citroen Berlingo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Berlingo 1.5 BlueHDI 100 hp?
The cost of Stage 1 for the Citroen Berlingo 1.5 BlueHDI 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.