Citroen Berlingo 1.2 THP Puretech 110 hp — Stage 1 file (+35 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Citroen Berlingo 1.2 THP Puretech 110 hp ECU

Citroen Berlingo (2018) 1.2 THP Puretech 110 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 110 to 145 hp (+35 hp, +32%) and torque from 205 to 270 Nm (+65 Nm). This engine ships with different ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.

Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. PureTech is Citroen's badge for its turbo petrol engines. Modern Citroen petrol engines use Tricore ECUs, often requiring Bench. Citroen turbo petrol engines deliver a noticeable gain with Stage 1.

The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen petrol engines gives a noticeable gain. Modern Citroens use Tricore TPROT protection, so a Bench read is required. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.

Frequently asked questions

What power gain do you get after chip tuning the Citroen Berlingo 1.2 THP Puretech 110 hp?

After Stage 1 the power of the Citroen Berlingo 1.2 THP Puretech 110 hp rises from 110 to 145 hp, a gain of 35 hp (+32%). Torque rises from 205 to 270 Nm (+65 Nm).

How does Stage 1 differ from stock on the Citroen Berlingo?

Stage 1 on the Citroen Berlingo 1.2 THP Puretech 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.

Is a Stage 1 remap safe for the 1.2 THP Puretech 110 hp?

Stage 1 on the Citroen Berlingo 1.2 THP Puretech 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Citroen Berlingo 1.2 THP Puretech 110 hp?

Stage 2 on the Citroen Berlingo 1.2 THP Puretech 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

How many ECU variants does the Citroen Berlingo 1.2 THP Puretech 110 hp have?

The Citroen Berlingo 1.2 THP Puretech 110 hp has 3 ECU variants: Valeo VD46.1, Siemens/Continental VD56.1, Valeo VD56.1. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Citroen Berlingo?

Stage 1 on the Citroen Berlingo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Citroen Berlingo 1.2 THP Puretech 110 hp done?

The full remap cycle for the Citroen Berlingo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Citroen Berlingo?

The original Citroen Berlingo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Citroen Berlingo 1.2 THP Puretech 110 hp?

The cost of Stage 1 for the Citroen Berlingo 1.2 THP Puretech 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno