Citroen Berlingo 1.6 BlueHDI 100 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Citroen Berlingo 1.6 BlueHDI 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Berlingo 1.6 BlueHDI 100 hp ECU
Citroen Berlingo (2015) 1.6 BlueHDI 100 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 100 to 135 hp (+35 hp, +35%) and torque from 254 to 300 Nm (+46 Nm). ECU — Bosch EDC17C60. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Citroen is part of the Stellantis group (formerly PSA Peugeot Citroen). The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Mid-generation diesel models use standard OBD read/write.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Citroen Berlingo 1.6 BlueHDI 100 hp?
Stage 1 chip tuning on the Citroen Berlingo 1.6 BlueHDI 100 hp boosts engine output by 35 hp: from 100 to 135 hp. Torque rises from 254 to 300 Nm (+46 Nm).
What changes in the Citroen Berlingo ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Citroen Berlingo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Citroen Berlingo 1.6 BlueHDI 100 hp?
A remap of the Citroen Berlingo 1.6 BlueHDI 100 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Citroen Berlingo 1.6 BlueHDI 100 hp?
Stage 2 for the Citroen Berlingo 1.6 BlueHDI 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Citroen Berlingo 1.6 BlueHDI 100 hp use?
The Citroen Berlingo 1.6 BlueHDI 100 hp is fitted with the Bosch EDC17C60 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Citroen Berlingo remain valid after Stage 1?
After remapping the Citroen Berlingo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Citroen Berlingo?
Reading and writing via OBD takes 25-30 minutes on the Citroen Berlingo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Citroen Berlingo?
Before Stage 1 the original of the Citroen Berlingo 1.6 BlueHDI 100 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Citroen Berlingo 1.6 BlueHDI 100 hp cost?
The remap price for the Citroen Berlingo 1.6 BlueHDI 100 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.