Citroen Berlingo 1.6i 16v 90 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Citroen Berlingo 1.6i 16v 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Citroen Berlingo 1.6i 16v 90 hp ECU
Citroen Berlingo (2012) 1.6i 16v 90 hp — mass-market petrol engine of the passenger segment of the Stellantis group (Франция, 1919). Stage 1 chip tuning raises power from 90 to 95 hp (+5 hp, +6%) and torque from 132 to 140 Nm (+8 Nm). ECU — Bosch MEV17.4.2. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Citroen range covers compacts, saloons, SUVs, MPVs and commercial vehicles. Citroen is a French carmaker, founded in 1919 by Andre Citroen. Citroen has a history of innovation, from hydropneumatic suspension to front-wheel drive. PureTech is Citroen's badge for its turbo petrol engines. The Citroen petrol range is shared with Peugeot and Opel within Stellantis. Low-output Citroen petrol engines are naturally aspirated city units, so the gain is modest.
ECUs are standardised across Stellantis, so Citroen files often work on Peugeot/Opel/DS. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. The Citroen community in France and Western Europe has a large pool of Stage files. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
How many horsepower does the Citroen Berlingo 1.6i 16v 90 hp reach after a remap?
The Stage 1 gain for the Citroen Berlingo 1.6i 16v 90 hp is 5 hp (+6%) over the stock 90 hp, for a total of 95 hp. Torque rises from 132 to 140 Nm (+8 Nm).
What is Stage 1 chip tuning for the Citroen Berlingo?
Stage 1 on the Citroen Berlingo 1.6i 16v 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +5 hp with no hardware changes.
Is Stage 1 safe for the low-output Citroen Berlingo 1.6i 16v 90 hp?
Stage 1 on the base Citroen Berlingo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Citroen Berlingo 1.6i 16v 90 hp?
Stage 2 on the Citroen Berlingo 1.6i 16v 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Citroen Berlingo 1.6i 16v 90 hp run?
The control unit of the Citroen Berlingo 1.6i 16v 90 hp is the Bosch MEV17.4.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Citroen Berlingo?
Stage 1 on the Citroen Berlingo voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Citroen Berlingo 1.6i 16v 90 hp done?
The full remap cycle for the Citroen Berlingo — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Citroen Berlingo?
The original Citroen Berlingo ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Citroen Berlingo 1.6i 16v 90 hp?
The cost of Stage 1 for the Citroen Berlingo 1.6i 16v 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.