Chrysler Sebring 2.0 CRD 136 hp — Stage 1 file (+39 hp)
hp
Stage 1 file for Chrysler Sebring 2.0 CRD 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Chrysler Sebring 2.0 CRD 136 hp ECU
Chrysler Sebring (2007) 2.0 CRD 136 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 136 to 175 hp (+39 hp, +29%) and torque from 315 to 400 Nm (+85 Nm). The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Pentastar V6 is the group's signature petrol engine, fitted across many FCA/Stellantis models. Chrysler is an American carmaker, founded in 1925 by Walter Chrysler. Chrysler currently builds mainly minivans and the 300 saloon. Chrysler uses Cummins diesels in the commercial segment (Ram). DPF/SCR with AdBlue is standard on modern Chrysler/Ram diesels. On mid-range Chrysler diesels, Stage 1 is felt in Nm.
The US Chrysler community has a large pool of ready-made Stage files. HP Tuners is the leading tool for Chrysler/Dodge. On mid-range Chrysler models, Stage 1 preserves engine life.
Frequently asked questions
How many horsepower does the Chrysler Sebring 2.0 CRD 136 hp reach after a remap?
After Stage 1 the power of the Chrysler Sebring 2.0 CRD 136 hp rises from 136 to 175 hp, a gain of 39 hp (+29%). Torque rises from 315 to 400 Nm (+85 Nm).
How does Stage 1 differ from stock on the Chrysler Sebring?
Stage 1 on the Chrysler Sebring 2.0 CRD 136 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 CRD 136 hp?
Stage 1 on the Chrysler Sebring 2.0 CRD 136 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Chrysler Sebring 2.0 CRD 136 hp?
Stage 2 on the Chrysler Sebring 2.0 CRD 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Chrysler Sebring?
Stage 1 on the Chrysler Sebring voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Chrysler Sebring 2.0 CRD 136 hp done?
The full remap cycle for the Chrysler Sebring — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Chrysler Sebring?
The original Chrysler Sebring ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Chrysler Sebring 2.0 CRD 136 hp?
The cost of Stage 1 for the Chrysler Sebring 2.0 CRD 136 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.