Chevrolet Orlando 2.0 VCDI 163 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Chevrolet Orlando 2.0 VCDI 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Chevrolet Orlando 2.0 VCDI 163 hp ECU
Chevrolet Orlando (2011) 2.0 VCDI 163 hp — mass-market diesel engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 163 to 185 hp (+22 hp, +13%) and torque from 350 to 430 Nm (+80 Nm). This engine ships with different ECU variants: Delphi DCM3.7AP, Bosch EDC17C19, Bosch EDC17CP47. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The LS-series V8 is Chevrolet's iconic engine family (Camaro, Corvette). The Camaro and Corvette are Chevrolet's iconic muscle and sports cars. The Silverado is Chevrolet's flagship pickup. Duramax is the proprietary Chevrolet/GMC diesel range for pickups and trucks. DPF/SCR with AdBlue is standard on modern Duramax engines. Mid-range Chevrolet diesels are a mainstream chip tuning subject.
HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Mid-range Chevrolet models are a mainstream chip tuning subject.
Frequently asked questions
What is the Stage 1 effect on the Chevrolet Orlando 2.0 VCDI 163 hp?
The Stage 1 gain for the Chevrolet Orlando 2.0 VCDI 163 hp is 22 hp (+13%) over the stock 163 hp, for a total of 185 hp. Torque rises from 350 to 430 Nm (+80 Nm).
What is Stage 1 chip tuning for the Chevrolet Orlando?
Stage 1 on the Chevrolet Orlando 2.0 VCDI 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 VCDI 163 hp?
Stage 1 on the Chevrolet Orlando 2.0 VCDI 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Chevrolet Orlando 2.0 VCDI 163 hp?
Stage 2 on the Chevrolet Orlando 2.0 VCDI 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Chevrolet Orlando 2.0 VCDI 163 hp have?
The Chevrolet Orlando 2.0 VCDI 163 hp has 3 ECU variants: Delphi DCM3.7AP, Bosch EDC17C19, Bosch EDC17CP47. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Chevrolet Orlando?
Stage 1 on the Chevrolet Orlando voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Chevrolet Orlando 2.0 VCDI 163 hp done?
The full remap cycle for the Chevrolet Orlando — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Chevrolet Orlando?
The original Chevrolet Orlando ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Chevrolet Orlando 2.0 VCDI 163 hp?
The cost of Stage 1 for the Chevrolet Orlando 2.0 VCDI 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.