Chevrolet Equinox 2.0 T 252 hp — Stage 1 file (+48 hp)
hp
Stage 1 file for Chevrolet Equinox 2.0 T 252 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Chevrolet Equinox 2.0 T 252 hp ECU
Chevrolet Equinox (2017 - III) 2.0 T 252 hp — mass-market petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 252 to 300 hp (+48 hp, +19%) and torque from 353 to 450 Nm (+97 Nm). This engine ships with different ECU variants: Delco E80, Delco T87. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2017 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Chevrolet is an American carmaker, founded in 1911 and part of General Motors since 1918. Chevrolet is GM's mass-market brand, focused on pickups, muscle cars and SUVs. The LS-series V8 is Chevrolet's iconic engine family (Camaro, Corvette). Camaro 2.0/3.6 delivers a solid gain with Stage 1. The LT-series V8 is the modern LS replacement, fitted to Camaro/Corvette/Silverado. GM ECUs (E78/E80/E92) are Bosch-based but use their own checksum.
LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Chevrolet Equinox 2.0 T 252 hp?
The Stage 1 gain for the Chevrolet Equinox 2.0 T 252 hp is 48 hp (+19%) over the stock 252 hp, for a total of 300 hp. Torque rises from 353 to 450 Nm (+97 Nm).
What is Stage 1 chip tuning for the Chevrolet Equinox?
Stage 1 is a software optimization of the factory ECU firmware of the Chevrolet Equinox with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Chevrolet Equinox?
The high-output Chevrolet Equinox 2.0 T 252 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Chevrolet Equinox 2.0 T 252 hp?
Stage 2 on the Chevrolet Equinox 2.0 T 252 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Chevrolet Equinox 2.0 T 252 hp built with?
The Chevrolet Equinox 2.0 T 252 hp comes with 2 ECU variants: Delco E80, Delco T87. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Chevrolet Equinox remain valid after Stage 1?
After remapping the Chevrolet Equinox, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Chevrolet Equinox?
Reading and writing via OBD takes 25-30 minutes on the Chevrolet Equinox. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Chevrolet Equinox?
Before Stage 1 the original of the Chevrolet Equinox 2.0 T 252 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Chevrolet Equinox 2.0 T 252 hp cost?
The remap price for the Chevrolet Equinox 2.0 T 252 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.