CF Moto CFORCE Series 495 38hp (28kW) 44Nm — Stage 1 file (+6 hp)
hp
Stage 1 file for CF Moto CFORCE Series 495 38hp (28kW) 44Nm
Target +0 hp. Custom development for your engine.
Chip tuning for CF Moto CFORCE Series 495 38hp (28kW) 44Nm ECU
CF Moto CFORCE Series (500 (2017+)) 495 38hp (28kW) 44Nm — mass-market petrol engine of the motorcycle segment of the CFMOTO group (Китай, 1989). Stage 1 chip tuning raises power from 38 to 44 hp (+6 hp, +16%) and torque from 44 to 51 Nm (+7 Nm). A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
CF Moto is a mass-market brand with an emphasis on affordability. CF Moto is a Chinese maker of motorcycles and ATVs, founded in 1989. Ducati uses its proprietary L-twin (90-degree V-twin) and V4 engines.
Motorcycle factory calibration often includes limiters to pass certification. The motorcycle chip tuning segment is a narrow niche centred on track tuning. Low-output Ducati models are rare, as the brand is positioned as sporting.
Frequently asked questions
How many horsepower does the CF Moto CFORCE Series 495 38hp (28kW) 44Nm reach after a remap?
Stage 1 chip tuning on the CF Moto CFORCE Series 495 38hp (28kW) 44Nm boosts engine output by 6 hp: from 38 to 44 hp. Torque rises from 44 to 51 Nm (+7 Nm).
What changes in the CF Moto CFORCE Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the CF Moto CFORCE Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +6 hp with no hardware changes.
Is Stage 1 worth doing on the base CF Moto CFORCE Series?
Yes, Stage 1 on the low-output CF Moto CFORCE Series 495 38hp (28kW) 44Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the CF Moto CFORCE Series 495 38hp (28kW) 44Nm?
Stage 2 for the CF Moto CFORCE Series 495 38hp (28kW) 44Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the CF Moto CFORCE Series remain valid after Stage 1?
After remapping the CF Moto CFORCE Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the CF Moto CFORCE Series?
Reading and writing via OBD takes 25-30 minutes on the CF Moto CFORCE Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the CF Moto CFORCE Series?
Before Stage 1 the original of the CF Moto CFORCE Series 495 38hp (28kW) 44Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the CF Moto CFORCE Series 495 38hp (28kW) 44Nm cost?
The remap price for the CF Moto CFORCE Series 495 38hp (28kW) 44Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.