CF Moto CFORCE Series 1000 74hp (54kW) 79Nm — Stage 1 file (+12 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for CF Moto CFORCE Series 1000 74hp (54kW) 79Nm ECU

CF Moto CFORCE Series (1000 (2017+)) 1000 74hp (54kW) 79Nm — mass-market petrol engine of the motorcycle segment of the CFMOTO group (Китай, 1989). Stage 1 chip tuning raises power from 74 to 86 hp (+12 hp, +16%) and torque from 79 to 90 Nm (+11 Nm).

CF Moto is a Chinese maker of motorcycles and ATVs, founded in 1989. CF Moto is a mass-market brand with an emphasis on affordability. Ducati uses its proprietary L-twin (90-degree V-twin) and V4 engines.

The motorcycle chip tuning segment is a narrow niche centred on track tuning. Motorcycle factory calibration often includes limiters to pass certification. Low-output Ducati models are rare, as the brand is positioned as sporting.

Frequently asked questions

What is the Stage 1 effect on the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm?

After Stage 1 the power of the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm rises from 74 to 86 hp, a gain of 12 hp (+16%). Torque rises from 79 to 90 Nm (+11 Nm).

How does Stage 1 differ from stock on the CF Moto CFORCE Series?

Stage 1 on the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +12 hp with no hardware changes.

Is Stage 1 safe for the low-output CF Moto CFORCE Series 1000 74hp (54kW) 79Nm?

Stage 1 on the base CF Moto CFORCE Series is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.

How does Stage 2 differ from Stage 1 on the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm?

Stage 2 on the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the CF Moto CFORCE Series?

Stage 1 on the CF Moto CFORCE Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm done?

The full remap cycle for the CF Moto CFORCE Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the CF Moto CFORCE Series?

The original CF Moto CFORCE Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm?

The cost of Stage 1 for the CF Moto CFORCE Series 1000 74hp (54kW) 79Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno