Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm — Stage 1 file (+65 hp)
hp
Stage 1 file for Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm ECU
Caterpillar C15 (I) 15.2 Acert 507hp (373kW) 2509Nm — industrial diesel engine of the agricultural segment of the Caterpillar Inc. group (США, 1925). Stage 1 chip tuning raises power from 507 to 572 hp (+65 hp, +13%) and torque from 2509 to 2880 Nm (+371 Nm).
Caterpillar is an American maker of heavy equipment and diesel engines, founded in 1925. The CAT C7, C9, C13, C15 and C18 form a range of diesel engines for heavy equipment. The CAT logo is an iconic emblem of the industrial segment. CAT engines are used in construction, mining and marine equipment. DPF/SCR with AdBlue is standard on modern Tier 4 models. Top-tier CAT mining machines sit at the power ceiling of the industrial segment.
The CAT community is a niche corner of industrial chip tuning. The CAT ECU is a locked platform requiring specialised tooling. Top-tier CAT mining machines sit at the power ceiling of the industry.
Frequently asked questions
What power gain do you get after chip tuning the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm?
After Stage 1 the power of the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm rises from 507 to 572 hp, a gain of 65 hp (+13%). Torque rises from 2509 to 2880 Nm (+371 Nm).
How does Stage 1 differ from stock on the Caterpillar C15?
Stage 1 on the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +65 hp with no hardware changes.
What does Stage 1 give on the top-spec Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm?
Stage 1 for the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm?
Stage 2 on the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Caterpillar C15?
Stage 1 on the Caterpillar C15 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm done?
The full remap cycle for the Caterpillar C15 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Caterpillar C15?
The original Caterpillar C15 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm?
The cost of Stage 1 for the Caterpillar C15 15.2 Acert 507hp (373kW) 2509Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.