Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm — Stage 1 file (+65 hp)
hp
Stage 1 file for Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm ECU
Caterpillar C13 (I) 12.5 DPF 340hp (250kW) 1695Nm — industrial diesel engine of the agricultural segment of the Caterpillar Inc. group (США, 1925). Stage 1 chip tuning raises power from 340 to 405 hp (+65 hp, +19%) and torque from 1695 to 2045 Nm (+350 Nm).
The CAT logo is an iconic emblem of the industrial segment. Caterpillar is the world's largest maker of construction and mining equipment. Caterpillar is an American maker of heavy equipment and diesel engines, founded in 1925. CAT engines are used in construction, mining and marine equipment. DPF/SCR with AdBlue is standard on modern Tier 4 models. High-output CAT machines are the flagships of the construction and mining equipment range.
The CAT ECU is a locked platform requiring specialised tooling. On CAT, Stage 1 focuses on torque and fuel economy. The CAT community is a niche corner of industrial chip tuning. High-output CAT machines are the flagships of the construction and mining segment.
Frequently asked questions
How many horsepower does the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm reach after a remap?
The Stage 1 gain for the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm is 65 hp (+19%) over the stock 340 hp, for a total of 405 hp. Torque rises from 1695 to 2045 Nm (+350 Nm).
What is Stage 1 chip tuning for the Caterpillar C13?
Stage 1 on the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +65 hp with no hardware changes.
What does Stage 1 give on the powerful Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm?
The high-output Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm?
Stage 2 on the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Caterpillar C13?
Stage 1 on the Caterpillar C13 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm done?
The full remap cycle for the Caterpillar C13 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Caterpillar C13?
The original Caterpillar C13 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm?
The cost of Stage 1 for the Caterpillar C13 12.5 DPF 340hp (250kW) 1695Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.