Caterpillar C12 12.0 355hp (261kW) 1350Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for Caterpillar C12 12.0 355hp (261kW) 1350Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Caterpillar C12 12.0 355hp (261kW) 1350Nm ECU
Caterpillar C12 (I) 12.0 355hp (261kW) 1350Nm — industrial diesel engine of the agricultural segment of the Caterpillar Inc. group (США, 1925). Stage 1 chip tuning raises power from 355 to 395 hp (+40 hp, +11%) and torque from 1350 to 1595 Nm (+245 Nm).
The CAT C7, C9, C13, C15 and C18 form a range of diesel engines for heavy equipment. The CAT logo is an iconic emblem of the industrial segment. Caterpillar is the world's largest maker of construction and mining equipment. CAT engines are used in construction, mining and marine equipment. DPF/SCR with AdBlue is standard on modern Tier 4 models. Top-tier CAT mining machines sit at the power ceiling of the industrial segment.
The CAT ECU is a locked platform requiring specialised tooling. The CAT community is a niche corner of industrial chip tuning. Top-tier CAT mining machines sit at the power ceiling of the industry.
Frequently asked questions
How much does the power of the Caterpillar C12 12.0 355hp (261kW) 1350Nm increase after Stage 1?
Stage 1 for the Caterpillar C12 12.0 355hp (261kW) 1350Nm adds +40 hp — power increases from 355 to 395 hp (+11%). Torque rises from 1350 to 1595 Nm (+245 Nm).
What does a Stage 1 remap of the Caterpillar C12 12.0 355hp (261kW) 1350Nm include?
Stage 1 on the Caterpillar C12 12.0 355hp (261kW) 1350Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
What does Stage 1 give on the top-spec Caterpillar C12 12.0 355hp (261kW) 1350Nm?
On the top-spec Caterpillar C12 12.0 355hp (261kW) 1350Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Caterpillar C12 12.0 355hp (261kW) 1350Nm?
Stage 2 for the Caterpillar C12 12.0 355hp (261kW) 1350Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Caterpillar C12?
Stage 1 on the Caterpillar C12 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Caterpillar C12 12.0 355hp (261kW) 1350Nm done?
The full remap cycle for the Caterpillar C12 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Caterpillar C12?
The original Caterpillar C12 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Caterpillar C12 12.0 355hp (261kW) 1350Nm?
The cost of Stage 1 for the Caterpillar C12 12.0 355hp (261kW) 1350Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.