Case Puma 230 227hp (167kW) 1089Nm — Stage 1 file (+57 hp)
hp
Stage 1 file for Case Puma 230 227hp (167kW) 1089Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Puma 230 227hp (167kW) 1089Nm ECU
Case Puma (I) 230 227hp (167kW) 1089Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 227 to 284 hp (+57 hp, +25%) and torque from 1089 to 1224 Nm (+135 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Case — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Case Puma 230 227hp (167kW) 1089Nm reach after a remap?
Stage 1 chip tuning on the Case Puma 230 227hp (167kW) 1089Nm boosts engine output by 57 hp: from 227 to 284 hp. Torque rises from 1089 to 1224 Nm (+135 Nm).
What changes in the Case Puma ECU after Stage 1?
Stage 1 on the Case Puma 230 227hp (167kW) 1089Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +57 hp with no hardware changes.
What does Stage 1 give on the powerful Case Puma 230 227hp (167kW) 1089Nm?
Stage 1 on the powerful Case Puma 230 227hp (167kW) 1089Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Case Puma 230 227hp (167kW) 1089Nm?
Stage 2 for the Case Puma 230 227hp (167kW) 1089Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Case Puma?
Stage 1 on the Case Puma voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Puma 230 227hp (167kW) 1089Nm done?
The full remap cycle for the Case Puma — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Puma?
The original Case Puma ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Puma 230 227hp (167kW) 1089Nm?
The cost of Stage 1 for the Case Puma 230 227hp (167kW) 1089Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.