Case Puma 180 182hp (134kW) 840Nm — Stage 1 file (+25 hp)
hp
Stage 1 file for Case Puma 180 182hp (134kW) 840Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Puma 180 182hp (134kW) 840Nm ECU
Case Puma (I) 180 182hp (134kW) 840Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 182 to 207 hp (+25 hp, +14%) and torque from 840 to 948 Nm (+108 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Case среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Case Puma 180 182hp (134kW) 840Nm?
The Stage 1 gain for the Case Puma 180 182hp (134kW) 840Nm is 25 hp (+14%) over the stock 182 hp, for a total of 207 hp. Torque rises from 840 to 948 Nm (+108 Nm).
What is Stage 1 chip tuning for the Case Puma?
Stage 1 on the Case Puma 180 182hp (134kW) 840Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 180 182hp (134kW) 840Nm?
Stage 1 on the Case Puma 180 182hp (134kW) 840Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Case Puma 180 182hp (134kW) 840Nm?
Stage 2 on the Case Puma 180 182hp (134kW) 840Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Case Puma?
Stage 1 on the Case Puma voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Puma 180 182hp (134kW) 840Nm done?
The full remap cycle for the Case Puma — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Puma?
The original Case Puma ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Puma 180 182hp (134kW) 840Nm?
The cost of Stage 1 for the Case Puma 180 182hp (134kW) 840Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.