Case MXU 135 6.7 R6 136hp (100kW) 545Nm — Stage 1 file (+21 hp)
hp
Stage 1 file for Case MXU 135 6.7 R6 136hp (100kW) 545Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case MXU 135 6.7 R6 136hp (100kW) 545Nm ECU
Case MXU (I) 135 6.7 R6 136hp (100kW) 545Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 136 to 157 hp (+21 hp, +15%) and torque from 545 to 613 Nm (+68 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Case среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Case MXU 135 6.7 R6 136hp (100kW) 545Nm increase after Stage 1?
Stage 1 for the Case MXU 135 6.7 R6 136hp (100kW) 545Nm adds +21 hp — power increases from 136 to 157 hp (+15%). Torque rises from 545 to 613 Nm (+68 Nm).
What does a Stage 1 remap of the Case MXU 135 6.7 R6 136hp (100kW) 545Nm include?
Stage 1 on the Case MXU 135 6.7 R6 136hp (100kW) 545Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +21 hp with no hardware changes.
Is a Stage 1 remap safe for the 135 6.7 R6 136hp (100kW) 545Nm?
Stage 1 on the Case MXU 135 6.7 R6 136hp (100kW) 545Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Case MXU 135 6.7 R6 136hp (100kW) 545Nm?
Stage 2 for the Case MXU 135 6.7 R6 136hp (100kW) 545Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Case MXU?
Stage 1 on the Case MXU voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case MXU 135 6.7 R6 136hp (100kW) 545Nm done?
The full remap cycle for the Case MXU — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case MXU?
The original Case MXU ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case MXU 135 6.7 R6 136hp (100kW) 545Nm?
The cost of Stage 1 for the Case MXU 135 6.7 R6 136hp (100kW) 545Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.