Case MXU 110 4.5 R4 116hp (85kW) 487Nm — Stage 1 file (+22 hp)
hp
Stage 1 file for Case MXU 110 4.5 R4 116hp (85kW) 487Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case MXU 110 4.5 R4 116hp (85kW) 487Nm ECU
Case MXU (I) 110 4.5 R4 116hp (85kW) 487Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 116 to 138 hp (+22 hp, +19%) and torque from 487 to 547 Nm (+60 Nm).
Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Case specialises in tractors, combines and special machinery. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Case среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Case MXU 110 4.5 R4 116hp (85kW) 487Nm?
After Stage 1 the power of the Case MXU 110 4.5 R4 116hp (85kW) 487Nm rises from 116 to 138 hp, a gain of 22 hp (+19%). Torque rises from 487 to 547 Nm (+60 Nm).
How does Stage 1 differ from stock on the Case MXU?
Stage 1 is a software optimization of the factory ECU firmware of the Case MXU with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
What is the risk of Stage 1 on the Case MXU 110 4.5 R4 116hp (85kW) 487Nm?
A remap of the Case MXU 110 4.5 R4 116hp (85kW) 487Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Case MXU 110 4.5 R4 116hp (85kW) 487Nm?
Stage 2 on the Case MXU 110 4.5 R4 116hp (85kW) 487Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Case MXU remain valid after Stage 1?
After remapping the Case MXU, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Case MXU?
Reading and writing via OBD takes 25-30 minutes on the Case MXU. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Case MXU?
Before Stage 1 the original of the Case MXU 110 4.5 R4 116hp (85kW) 487Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Case MXU 110 4.5 R4 116hp (85kW) 487Nm cost?
The remap price for the Case MXU 110 4.5 R4 116hp (85kW) 487Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.