Case MXM 175 7.5 R6 177hp (130kW) 790Nm — Stage 1 file (+38 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Case MXM 175 7.5 R6 177hp (130kW) 790Nm ECU

Case MXM (I) 175 7.5 R6 177hp (130kW) 790Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 177 to 215 hp (+38 hp, +21%) and torque from 790 to 955 Nm (+165 Nm).

Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.

Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Case среднего класса — массовый объект чип-тюнинга в агросегменте.

Frequently asked questions

How many horsepower does the Case MXM 175 7.5 R6 177hp (130kW) 790Nm reach after a remap?

The Stage 1 gain for the Case MXM 175 7.5 R6 177hp (130kW) 790Nm is 38 hp (+21%) over the stock 177 hp, for a total of 215 hp. Torque rises from 790 to 955 Nm (+165 Nm).

What is Stage 1 chip tuning for the Case MXM?

Stage 1 on the Case MXM 175 7.5 R6 177hp (130kW) 790Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +38 hp with no hardware changes.

Is a Stage 1 remap safe for the 175 7.5 R6 177hp (130kW) 790Nm?

Stage 1 on the Case MXM 175 7.5 R6 177hp (130kW) 790Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Case MXM 175 7.5 R6 177hp (130kW) 790Nm?

Stage 2 on the Case MXM 175 7.5 R6 177hp (130kW) 790Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the Case MXM?

Stage 1 on the Case MXM voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Case MXM 175 7.5 R6 177hp (130kW) 790Nm done?

The full remap cycle for the Case MXM — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Case MXM?

The original Case MXM ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Case MXM 175 7.5 R6 177hp (130kW) 790Nm?

The cost of Stage 1 for the Case MXM 175 7.5 R6 177hp (130kW) 790Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno