Case Maxxum 110 112hp (82kW) 520Nm — Stage 1 file (+22 hp)
hp
Stage 1 file for Case Maxxum 110 112hp (82kW) 520Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Maxxum 110 112hp (82kW) 520Nm ECU
Case Maxxum (I) 110 112hp (82kW) 520Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 112 to 134 hp (+22 hp, +20%) and torque from 520 to 624 Nm (+104 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Case среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Case Maxxum 110 112hp (82kW) 520Nm increase after Stage 1?
After Stage 1 the power of the Case Maxxum 110 112hp (82kW) 520Nm rises from 112 to 134 hp, a gain of 22 hp (+20%). Torque rises from 520 to 624 Nm (+104 Nm).
How does Stage 1 differ from stock on the Case Maxxum?
Stage 1 on the Case Maxxum 110 112hp (82kW) 520Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.
Is a Stage 1 remap safe for the 110 112hp (82kW) 520Nm?
Stage 1 on the Case Maxxum 110 112hp (82kW) 520Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Case Maxxum 110 112hp (82kW) 520Nm?
Stage 2 on the Case Maxxum 110 112hp (82kW) 520Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Case Maxxum?
Stage 1 on the Case Maxxum voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Maxxum 110 112hp (82kW) 520Nm done?
The full remap cycle for the Case Maxxum — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Maxxum?
The original Case Maxxum ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Maxxum 110 112hp (82kW) 520Nm?
The cost of Stage 1 for the Case Maxxum 110 112hp (82kW) 520Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.