Case Magnum 290 284hp (209kW) 1397Nm — Stage 1 file (+66 hp)
hp
Stage 1 file for Case Magnum 290 284hp (209kW) 1397Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Magnum 290 284hp (209kW) 1397Nm ECU
Case Magnum (I) 290 284hp (209kW) 1397Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 284 to 350 hp (+66 hp, +23%) and torque from 1397 to 1738 Nm (+341 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Case — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Case Magnum 290 284hp (209kW) 1397Nm?
After Stage 1 the power of the Case Magnum 290 284hp (209kW) 1397Nm rises from 284 to 350 hp, a gain of 66 hp (+23%). Torque rises from 1397 to 1738 Nm (+341 Nm).
How does Stage 1 differ from stock on the Case Magnum?
Stage 1 on the Case Magnum 290 284hp (209kW) 1397Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +66 hp with no hardware changes.
What does Stage 1 give on the powerful Case Magnum 290 284hp (209kW) 1397Nm?
The high-output Case Magnum 290 284hp (209kW) 1397Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Case Magnum 290 284hp (209kW) 1397Nm?
Stage 2 on the Case Magnum 290 284hp (209kW) 1397Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Case Magnum?
Stage 1 on the Case Magnum voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Magnum 290 284hp (209kW) 1397Nm done?
The full remap cycle for the Case Magnum — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Magnum?
The original Case Magnum ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Magnum 290 284hp (209kW) 1397Nm?
The cost of Stage 1 for the Case Magnum 290 284hp (209kW) 1397Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.