Case Farmall U95 3.4 99hp (73kW) 407Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Case Farmall U95 3.4 99hp (73kW) 407Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Farmall U95 3.4 99hp (73kW) 407Nm ECU
Case Farmall (I) U95 3.4 99hp (73kW) 407Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 99 to 129 hp (+30 hp, +30%) and torque from 407 to 469 Nm (+62 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Case — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Case Farmall U95 3.4 99hp (73kW) 407Nm reach after a remap?
The Stage 1 gain for the Case Farmall U95 3.4 99hp (73kW) 407Nm is 30 hp (+30%) over the stock 99 hp, for a total of 129 hp. Torque rises from 407 to 469 Nm (+62 Nm).
What is Stage 1 chip tuning for the Case Farmall?
Stage 1 on the Case Farmall U95 3.4 99hp (73kW) 407Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is Stage 1 safe for the low-output Case Farmall U95 3.4 99hp (73kW) 407Nm?
Stage 1 on the base Case Farmall is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Case Farmall U95 3.4 99hp (73kW) 407Nm?
Stage 2 on the Case Farmall U95 3.4 99hp (73kW) 407Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Case Farmall?
Stage 1 on the Case Farmall voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Farmall U95 3.4 99hp (73kW) 407Nm done?
The full remap cycle for the Case Farmall — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Farmall?
The original Case Farmall ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Farmall U95 3.4 99hp (73kW) 407Nm?
The cost of Stage 1 for the Case Farmall U95 3.4 99hp (73kW) 407Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.