Case Farmall A65 2.9 65hp (48kW) 261Nm — Stage 1 file (+17 hp)
hp
Stage 1 file for Case Farmall A65 2.9 65hp (48kW) 261Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Case Farmall A65 2.9 65hp (48kW) 261Nm ECU
Case Farmall (I) A65 2.9 65hp (48kW) 261Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (США, 1842). Stage 1 chip tuning raises power from 65 to 82 hp (+17 hp, +26%) and torque from 261 to 309 Nm (+48 Nm).
Case specialises in tractors, combines and special machinery. Case IH is an American agricultural-machinery maker, founded in 1842. Case is part of CNH Industrial. Маломощные агро-дизели — компактная техника; Stage 1 безопасный. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Case — компактная техника; Stage 1 безопасный.
Frequently asked questions
What is the Stage 1 effect on the Case Farmall A65 2.9 65hp (48kW) 261Nm?
Stage 1 for the Case Farmall A65 2.9 65hp (48kW) 261Nm adds +17 hp — power increases from 65 to 82 hp (+26%). Torque rises from 261 to 309 Nm (+48 Nm).
What does a Stage 1 remap of the Case Farmall A65 2.9 65hp (48kW) 261Nm include?
Stage 1 on the Case Farmall A65 2.9 65hp (48kW) 261Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +17 hp with no hardware changes.
Is Stage 1 safe for the low-output Case Farmall A65 2.9 65hp (48kW) 261Nm?
Yes, Stage 1 on the low-output Case Farmall A65 2.9 65hp (48kW) 261Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Case Farmall A65 2.9 65hp (48kW) 261Nm?
Stage 2 for the Case Farmall A65 2.9 65hp (48kW) 261Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Case Farmall?
Stage 1 on the Case Farmall voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Case Farmall A65 2.9 65hp (48kW) 261Nm done?
The full remap cycle for the Case Farmall — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Case Farmall?
The original Case Farmall ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Case Farmall A65 2.9 65hp (48kW) 261Nm?
The cost of Stage 1 for the Case Farmall A65 2.9 65hp (48kW) 261Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.