Case — Stage 1 / Stage 2 parameters database

The CHIPOK database holds 52 engines for Case with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 7 models — from early generations to current platforms. Diesel engines only.

Choose a model

Models7

Engines52

ECU makersBosch / Continental / Denso / Siemens

File turnaround30–60 min

or choose step by step

Choose a vehicle type

Case models in the database (7)

Case Puma

14 engines avg. +33 hp

→

125 127hp (93kW) 590Nm·130 131hp (96kW) 631Nm·140 142hp (104kW) 640Nm·145 146hp (107kW) 698Nm·160 160hp (118kW) 767Nm·165 167hp (123kW) 770Nm more 8

Case CVX

10 engines avg. +29 hp

→

1145 6.6 R6 147hp (108kW) 610Nm·1155 6.6 R6 156hp (115kW) 660Nm·1170 6.6 R6 171hp (126kW) 725Nm·1190 6.6 R6 192hp (141kW) 790Nm·1195 6.6 R6 196hp (144kW) 792Nm·135 6.6 R6 137hp (101kW) 570Nm more 4

Case Magnum

9 engines avg. +71 hp

→

215 178hp (131kW) 1784Nm·225 224hp (165kW) 1117Nm·235 235hp (173kW) 1157Nm·250 252hp (185kW) 1271Nm·260 257hp (189kW) 1267Nm·280 279hp (205kW) 1395Nm more 3

Case Farmall

7 engines avg. +26 hp

→

A65 2.9 65hp (48kW) 261Nm·C55 3.2 55hp (40kW) 221Nm·C65 3.2 64hp (47kW) 260Nm·C75 3.2 75hp (55kW) 310Nm·U106 3.4 107hp (79kW) 444Nm·U115 3.4 114hp (84kW) 461Nm more 1

Case Maxxum

6 engines avg. +26 hp

→

110 112hp (82kW) 520Nm·115 117hp (86kW) 543Nm·120 121hp (89kW) 563Nm·125 125hp (92kW) 682Nm·130 132hp (97kW) 594Nm·140 141hp (104kW) 613Nm

Case MXM

3 engines avg. +41 hp

→

170 7.5 R6 175hp (129kW) 790Nm·175 7.5 R6 177hp (130kW) 790Nm·190 7.5 R6 195hp (143kW) 864Nm

Case MXU

3 engines avg. +21 hp

→

110 4.5 R4 116hp (85kW) 487Nm·125 6.7 R6 125hp (92kW) 504Nm·135 6.7 R6 136hp (100kW) 545Nm

About Case chip tuning

Engines and platforms:

Main engines: FPT NEF F4 / F5, Cursor 9/13, A8.7 / A11.1, B6.7 / X12 newer Tier 5
Platforms: Magnum 280-380, Puma 140-240, Steiger 420-620, Quadtrac, Maxxum, Optum, Axial-Flow combines (5140-9250)

Supported ECUs:

Manufacturers: Bosch / Continental / Denso / Siemens
Specific Case units in the database: Bosch EDC17C49 (NEF), EDC17CV41, EDC17CV44 (Cursor), EDC17C69, EDC7UC31, FPT IPC blocks, AFS Pro 700 / Pro 1200 monitor (telematics, not ECU)
Case specifics: same ECUs as New Holland (CNH Industrial) — calibrations are transferable

Service terms:

Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
File returned within 30-60 minutes during working hours
Free revisions based on an OBD log