Cadillac SRX 3.6 V6 258 hp — Stage 1 file (+12 hp)
hp
Stage 1 file for Cadillac SRX 3.6 V6 258 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cadillac SRX 3.6 V6 258 hp ECU
Cadillac SRX (2006) 3.6 V6 258 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 258 to 270 hp (+12 hp, +5%) and torque from 339 to 350 Nm (+11 Nm). This engine ships with different ECU variants: Bosch ME9.5, Bosch ME9.6.1. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2006 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
The Cadillac V-Series is the performance sub-brand (CTS-V, ATS-V, CT5-V Blackwing). Cadillac is GM's flagship premium brand, a US rival to Mercedes and BMW. Cadillac is General Motors' premium sub-brand, founded in 1902. The LT-series V8 is the modern LS replacement, fitted to Camaro/Corvette/Silverado. GM ECUs (E78/E80/E92) are Bosch-based but use their own checksum. The LS-series V8 is Chevrolet's iconic engine range dating from 1997.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Cadillac SRX 3.6 V6 258 hp?
The Stage 1 gain for the Cadillac SRX 3.6 V6 258 hp is 12 hp (+5%) over the stock 258 hp, for a total of 270 hp. Torque rises from 339 to 350 Nm (+11 Nm).
What is Stage 1 chip tuning for the Cadillac SRX?
Stage 1 chip tuning of the Cadillac SRX is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +12 hp with no hardware changes.
Is Stage 1 safe on the high-output Cadillac SRX 3.6 V6 258 hp?
The high-output Cadillac SRX 3.6 V6 258 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Cadillac SRX?
Stage 2 on the Cadillac SRX 3.6 V6 258 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Cadillac SRX 3.6 V6 258 hp?
The Cadillac SRX 3.6 V6 258 hp was fitted with different ECUs depending on the year and trim: Bosch ME9.5, Bosch ME9.6.1. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Cadillac SRX warranty after chip tuning?
The factory warranty of the Cadillac SRX does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Cadillac SRX take?
On the Cadillac SRX 3.6 V6 258 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Cadillac SRX?
Yes, the original ECU firmware of the Cadillac SRX 3.6 V6 258 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Cadillac SRX?
Stage 1 for the Cadillac SRX 3.6 V6 258 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.