Cadillac BLS 1.9d 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Cadillac BLS 1.9d 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cadillac BLS 1.9d 150 hp ECU
Cadillac BLS (2006) 1.9d 150 hp — premium diesel engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 320 to 400 Nm (+80 Nm). ECU — Bosch EDC16C9. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Cadillac shares platforms and engines with Chevrolet's premium segment. The Cadillac V-Series is the performance sub-brand (CTS-V, ATS-V, CT5-V Blackwing). Cadillac is GM's flagship premium brand, a US rival to Mercedes and BMW. Duramax is the proprietary Chevrolet/GMC diesel range for pickups and trucks. DPF/SCR with AdBlue is standard on modern Duramax engines. Mid-range Chevrolet diesels are a mainstream chip tuning subject.
HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Mid-range Chevrolet models are a mainstream chip tuning subject.
Frequently asked questions
What power gain do you get after chip tuning the Cadillac BLS 1.9d 150 hp?
Stage 1 for the Cadillac BLS 1.9d 150 hp adds +30 hp — power increases from 150 to 180 hp (+20%). Torque rises from 320 to 400 Nm (+80 Nm).
What does a Stage 1 remap of the Cadillac BLS 1.9d 150 hp include?
Stage 1 on the Cadillac BLS 1.9d 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9d 150 hp?
Stage 1 on the Cadillac BLS 1.9d 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Cadillac BLS 1.9d 150 hp?
Stage 2 for the Cadillac BLS 1.9d 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Cadillac BLS 1.9d 150 hp run?
The control unit of the Cadillac BLS 1.9d 150 hp is the Bosch EDC16C9. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Cadillac BLS?
Stage 1 on the Cadillac BLS voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Cadillac BLS 1.9d 150 hp done?
The full remap cycle for the Cadillac BLS — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Cadillac BLS?
The original Cadillac BLS ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Cadillac BLS 1.9d 150 hp?
The cost of Stage 1 for the Cadillac BLS 1.9d 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.