Cadillac ATS 3.6TT V6 470 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Cadillac ATS 3.6TT V6 470 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cadillac ATS 3.6TT V6 470 hp ECU
Cadillac ATS (2015) 3.6TT V6 470 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 470 to 510 hp (+40 hp, +9%) and torque from 603 to 715 Nm (+112 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
Cadillac shares platforms and engines with Chevrolet's premium segment. The Cadillac V-Series is the performance sub-brand (CTS-V, ATS-V, CT5-V Blackwing). Cadillac is GM's flagship premium brand, a US rival to Mercedes and BMW. The LT-series V8 is the modern LS replacement, fitted to Camaro/Corvette/Silverado. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. GM ECUs (E78/E80/E92) are Bosch-based but use their own checksum.
Camaro/Corvette confidently reach Stage 2 with hardware. LS-swap is an industry of its own (Chevy LS engines into any car). HP Tuners is the primary tool for Chevrolet/GM in the US. HP Tuners is the leading tool for top Chevrolet models. Top Chevrolet Corvette / Camaro ZL1 engines sit at the power ceiling of the American performance segment.
Frequently asked questions
How much does the power of the Cadillac ATS 3.6TT V6 470 hp increase after Stage 1?
Stage 1 for the Cadillac ATS 3.6TT V6 470 hp adds +40 hp — power increases from 470 to 510 hp (+9%). Torque rises from 603 to 715 Nm (+112 Nm).
What does a Stage 1 remap of the Cadillac ATS 3.6TT V6 470 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Cadillac ATS with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Does Stage 1 make sense on the Cadillac ATS 3.6TT V6 470 hp with this much power?
On the top-spec Cadillac ATS 3.6TT V6 470 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Cadillac ATS 3.6TT V6 470 hp?
Stage 2 for the Cadillac ATS 3.6TT V6 470 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Cadillac ATS remain valid after Stage 1?
After remapping the Cadillac ATS, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Cadillac ATS?
Reading and writing via OBD takes 25-30 minutes on the Cadillac ATS. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Cadillac ATS?
Before Stage 1 the original of the Cadillac ATS 3.6TT V6 470 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Cadillac ATS 3.6TT V6 470 hp cost?
The remap price for the Cadillac ATS 3.6TT V6 470 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.