Cadillac ATS 3.6 V6 323 hp — Stage 1 file (+2 hp)
hp
Stage 1 file for Cadillac ATS 3.6 V6 323 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cadillac ATS 3.6 V6 323 hp ECU
Cadillac ATS (2012) 3.6 V6 323 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 323 to 325 hp (+2 hp, +1%) and torque from 375 to 390 Nm (+15 Nm). This engine ships with different ECU variants: Delco E82, Delco T87A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Cadillac shares platforms and engines with Chevrolet's premium segment. The Cadillac V-Series is the performance sub-brand (CTS-V, ATS-V, CT5-V Blackwing). Cadillac is GM's flagship premium brand, a US rival to Mercedes and BMW. GM ECUs (E78/E80/E92) are Bosch-based but use their own checksum. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Cadillac ATS 3.6 V6 323 hp reach after a remap?
Stage 1 for the Cadillac ATS 3.6 V6 323 hp adds +2 hp — power increases from 323 to 325 hp (+1%). Torque rises from 375 to 390 Nm (+15 Nm).
What does a Stage 1 remap of the Cadillac ATS 3.6 V6 323 hp include?
Stage 1 chip tuning of the Cadillac ATS is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +2 hp with no hardware changes.
Is Stage 1 safe on the high-output Cadillac ATS 3.6 V6 323 hp?
Stage 1 on the powerful Cadillac ATS 3.6 V6 323 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Cadillac ATS?
Stage 2 for the Cadillac ATS 3.6 V6 323 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the Cadillac ATS 3.6 V6 323 hp?
The Cadillac ATS 3.6 V6 323 hp was fitted with different ECUs depending on the year and trim: Delco E82, Delco T87A. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Cadillac ATS warranty after chip tuning?
The factory warranty of the Cadillac ATS does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Cadillac ATS take?
On the Cadillac ATS 3.6 V6 323 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Cadillac ATS?
Yes, the original ECU firmware of the Cadillac ATS 3.6 V6 323 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Cadillac ATS?
Stage 1 for the Cadillac ATS 3.6 V6 323 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.