Cadillac ATS 2.0T 272 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Cadillac ATS 2.0T 272 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cadillac ATS 2.0T 272 hp ECU
Cadillac ATS (2012) 2.0T 272 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 272 to 300 hp (+28 hp, +10%) and torque from 350 to 460 Nm (+110 Nm). This engine ships with different ECU variants: Delco E39, Delco E39A, Delco E80, Delco T87. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
Cadillac is GM's flagship premium brand, a US rival to Mercedes and BMW. Cadillac is General Motors' premium sub-brand, founded in 1902. Cadillac shares platforms and engines with Chevrolet's premium segment. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. Camaro 2.0/3.6 delivers a solid gain with Stage 1.
HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Cadillac ATS 2.0T 272 hp?
Stage 1 chip tuning on the Cadillac ATS 2.0T 272 hp boosts engine output by 28 hp: from 272 to 300 hp. Torque rises from 350 to 460 Nm (+110 Nm).
What changes in the Cadillac ATS ECU after Stage 1?
Stage 1 on the Cadillac ATS 2.0T 272 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
What does Stage 1 give on the powerful Cadillac ATS 2.0T 272 hp?
Stage 1 on the powerful Cadillac ATS 2.0T 272 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Cadillac ATS 2.0T 272 hp?
Stage 2 for the Cadillac ATS 2.0T 272 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Cadillac ATS 2.0T 272 hp have?
The Cadillac ATS 2.0T 272 hp has 4 ECU variants: Delco E39, Delco E39A, Delco E80, Delco T87. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Cadillac ATS?
Stage 1 on the Cadillac ATS voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Cadillac ATS 2.0T 272 hp done?
The full remap cycle for the Cadillac ATS — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Cadillac ATS?
The original Cadillac ATS ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Cadillac ATS 2.0T 272 hp?
The cost of Stage 1 for the Cadillac ATS 2.0T 272 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.