Buick Encore 1.4 T 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Buick Encore 1.4 T 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Buick Encore 1.4 T 140 hp ECU
Buick Encore (2013) 1.4 T 140 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 200 to 270 Nm (+70 Nm). This engine ships with different ECU variants: Delco E78, Delco E83. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Buick is an American premium brand, founded in 1903 and part of General Motors since 1908. Buick specialises in premium saloons and SUVs for the North American and Chinese markets. Buick shares platforms and engines with Chevrolet and Cadillac. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. Mid-range Chevrolet turbo petrol engines are a mainstream Stage 1 subject.
Stage 1 on turbo Chevy engines delivers a noticeable gain. LS-swap is an industry of its own (Chevy LS engines into any car). HP Tuners is the primary tool for Chevrolet/GM in the US. Mid-range Chevrolet models are a mainstream chip tuning subject.
Frequently asked questions
How much horsepower does Stage 1 add for the Buick Encore 1.4 T 140 hp?
Stage 1 for the Buick Encore 1.4 T 140 hp adds +30 hp — power increases from 140 to 170 hp (+21%). Torque rises from 200 to 270 Nm (+70 Nm).
What does a Stage 1 remap of the Buick Encore 1.4 T 140 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Buick Encore with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Buick Encore 1.4 T 140 hp?
A remap of the Buick Encore 1.4 T 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Buick Encore 1.4 T 140 hp?
Stage 2 for the Buick Encore 1.4 T 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Buick Encore 1.4 T 140 hp built with?
The Buick Encore 1.4 T 140 hp comes with 2 ECU variants: Delco E78, Delco E83. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Buick Encore remain valid after Stage 1?
After remapping the Buick Encore, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Buick Encore?
Reading and writing via OBD takes 25-30 minutes on the Buick Encore. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Buick Encore?
Before Stage 1 the original of the Buick Encore 1.4 T 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Buick Encore 1.4 T 140 hp cost?
The remap price for the Buick Encore 1.4 T 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.