Buick Enclave 3.6 V6 310 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Buick Enclave 3.6 V6 310 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Buick Enclave 3.6 V6 310 hp ECU
Buick Enclave (2018) 3.6 V6 310 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 310 to 320 hp (+10 hp, +3%) and torque from 373 to 388 Nm (+15 Nm). This engine ships with different ECU variants: Delco E82, Delco T87A. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Buick is an American premium brand, founded in 1903 and part of General Motors since 1908. Buick specialises in premium saloons and SUVs for the North American and Chinese markets. Buick shares platforms and engines with Chevrolet and Cadillac. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. Camaro 2.0/3.6 delivers a solid gain with Stage 1.
LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. HP Tuners is the primary tool for Chevrolet/GM in the US. High-output Chevrolet Camaro / Silverado offer solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Buick Enclave 3.6 V6 310 hp?
The Stage 1 gain for the Buick Enclave 3.6 V6 310 hp is 10 hp (+3%) over the stock 310 hp, for a total of 320 hp. Torque rises from 373 to 388 Nm (+15 Nm).
What is Stage 1 chip tuning for the Buick Enclave?
Stage 1 is a software optimization of the factory ECU firmware of the Buick Enclave with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +10 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Buick Enclave?
The high-output Buick Enclave 3.6 V6 310 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Buick Enclave 3.6 V6 310 hp?
Stage 2 on the Buick Enclave 3.6 V6 310 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Buick Enclave 3.6 V6 310 hp built with?
The Buick Enclave 3.6 V6 310 hp comes with 2 ECU variants: Delco E82, Delco T87A. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Buick Enclave remain valid after Stage 1?
After remapping the Buick Enclave, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Buick Enclave?
Reading and writing via OBD takes 25-30 minutes on the Buick Enclave. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Buick Enclave?
Before Stage 1 the original of the Buick Enclave 3.6 V6 310 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Buick Enclave 3.6 V6 310 hp cost?
The remap price for the Buick Enclave 3.6 V6 310 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.