Buick Ankela 1.4 T (2003) 140 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Buick Ankela 1.4 T (2003) 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Buick Ankela 1.4 T (2003) 140 hp ECU
Buick Ankela (2014) 1.4 T (2003) 140 hp — premium petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 140 to 165 hp (+25 hp, +18%) and torque from 200 to 260 Nm (+60 Nm). This engine ships with different ECU variants: Delco E78, Delco E83. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Buick is an American premium brand, founded in 1903 and part of General Motors since 1908. Buick specialises in premium saloons and SUVs for the North American and Chinese markets. Buick shares platforms and engines with Chevrolet and Cadillac. The LS-series V8 is Chevrolet's iconic engine range dating from 1997. Chevrolet 2.0 / 1.4 Turbo are mainstream turbo engines for saloons and compacts. Mid-range Chevrolet turbo petrol engines are a mainstream Stage 1 subject.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Stage 1 on turbo Chevy engines delivers a noticeable gain. LS-swap is an industry of its own (Chevy LS engines into any car). Mid-range Chevrolet models are a mainstream chip tuning subject.
Frequently asked questions
How much horsepower does Stage 1 add for the Buick Ankela 1.4 T (2003) 140 hp?
After Stage 1 the power of the Buick Ankela 1.4 T (2003) 140 hp rises from 140 to 165 hp, a gain of 25 hp (+18%). Torque rises from 200 to 260 Nm (+60 Nm).
How does Stage 1 differ from stock on the Buick Ankela?
Stage 1 is a software optimization of the factory ECU firmware of the Buick Ankela with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Buick Ankela 1.4 T (2003) 140 hp?
A remap of the Buick Ankela 1.4 T (2003) 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Buick Ankela 1.4 T (2003) 140 hp?
Stage 2 on the Buick Ankela 1.4 T (2003) 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Buick Ankela 1.4 T (2003) 140 hp built with?
The Buick Ankela 1.4 T (2003) 140 hp comes with 2 ECU variants: Delco E78, Delco E83. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Buick Ankela remain valid after Stage 1?
After remapping the Buick Ankela, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Buick Ankela?
Reading and writing via OBD takes 25-30 minutes on the Buick Ankela. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Buick Ankela?
Before Stage 1 the original of the Buick Ankela 1.4 T (2003) 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Buick Ankela 1.4 T (2003) 140 hp cost?
The remap price for the Buick Ankela 1.4 T (2003) 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.