BMW XM 4.4 (XM) 653 hp — Stage 1 file (+147 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for BMW XM 4.4 (XM) 653 hp ECU

BMW XM (2022) 4.4 (XM) 653 hp — premium hybrid engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 653 to 800 hp (+147 hp, +23%) and torque from 800 to 1100 Nm (+300 Nm).

BMW's slogan is “Sheer Driving Pleasure”. BMW i is a dedicated full-EV line. On a PHEV, the ICE part is tuned just like the pure combustion variant. Full-EV BMWs keep the inverter and BMS locked, so traditional chip tuning does not apply.

Protection on top BMW models is the toughest in the group and requires Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.

Frequently asked questions

How much horsepower does Stage 1 add for the BMW XM 4.4 (XM) 653 hp?

The Stage 1 gain for the BMW XM 4.4 (XM) 653 hp is 147 hp (+23%) over the stock 653 hp, for a total of 800 hp. Torque rises from 800 to 1100 Nm (+300 Nm).

What is Stage 1 chip tuning for the BMW XM?

Stage 1 is a software optimization of the factory ECU firmware of the BMW XM with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +147 hp with no hardware changes.

Does Stage 1 make sense on the BMW XM 4.4 (XM) 653 hp with this much power?

Stage 1 for the BMW XM 4.4 (XM) 653 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.

What is Stage 2 for the BMW XM 4.4 (XM) 653 hp?

Stage 2 on the BMW XM 4.4 (XM) 653 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does the factory warranty of the BMW XM remain valid after Stage 1?

After remapping the BMW XM, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the BMW XM?

Reading and writing via OBD takes 25-30 minutes on the BMW XM. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the BMW XM?

Before Stage 1 the original of the BMW XM 4.4 (XM) 653 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the BMW XM 4.4 (XM) 653 hp cost?

The remap price for the BMW XM 4.4 (XM) 653 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 01.09.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno