BMW X6 M40i (2019) 340 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for BMW X6 M40i (2019) 340 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW X6 M40i (2019) 340 hp ECU
BMW X6 (2019 - G06) M40i (2019) 340 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 340 to 420 hp (+80 hp, +24%) and torque from 450 to 580 Nm (+130 Nm). This engine ships with different ECU variants: Bosch MG1CS003, Bosch MG1CS201. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF 8HPxx, ZF 8HPxx-Gen3 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
xDrive all-wheel drive is BMW's signature system. The factory calibration on BMW petrol engines is conservative, leaving headroom for Stage 1 without hardware changes. Third-party flash platforms are an industry of their own for the BMW community. The BMW petrol range spans the mainstream segment and the sporting M-series.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. Protection on top BMW models is the toughest in the group and requires Bench. The BMW premium segment is a high-output platform with Stage 2 potential. The hardware headroom allows a confident move to Stage 1 without changing the turbo. High-output engines deliver a solid gain with Stage 1 on stock hardware.
The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain. The gearbox comes in versions by torque class, so its tolerance depends on the engine. BMW's main gearbox is a modern multi-speed automatic.
Frequently asked questions
How much horsepower does Stage 1 add for the BMW X6 M40i (2019) 340 hp?
The Stage 1 gain for the BMW X6 M40i (2019) 340 hp is 80 hp (+24%) over the stock 340 hp, for a total of 420 hp. Torque rises from 450 to 580 Nm (+130 Nm).
What is Stage 1 chip tuning for the BMW X6?
Stage 1 chip tuning of the BMW X6 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +80 hp with no hardware changes.
Is Stage 1 safe on the high-output BMW X6 M40i (2019) 340 hp?
The high-output BMW X6 M40i (2019) 340 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the BMW X6?
Stage 2 on the BMW X6 M40i (2019) 340 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the BMW X6 M40i (2019) 340 hp?
The BMW X6 M40i (2019) 340 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS003, Bosch MG1CS201. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the BMW X6 M40i (2019) 340 hp have?
The BMW X6 M40i (2019) 340 hp comes with 2 different automatic-transmission TCU units: ZF 8HPxx, ZF 8HPxx-Gen3. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the BMW X6 warranty after chip tuning?
The factory warranty of the BMW X6 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the BMW X6 take?
On the BMW X6 M40i (2019) 340 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the BMW X6?
Yes, the original ECU firmware of the BMW X6 M40i (2019) 340 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the BMW X6?
Stage 1 for the BMW X6 M40i (2019) 340 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.