BMW X5 40e 313 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for BMW X5 40e 313 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW X5 40e 313 hp ECU
BMW X5 (2013 - F15) 40e 313 hp — premium hybrid engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 313 to 350 hp (+37 hp, +12%) and torque from 450 to 530 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.4, Bosch MEVD17.2.9. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants.
The BMW community is one of the most active in Europe for chip tuning. BMW i is a dedicated full-EV line. On a PHEV, the ICE part is tuned just like the pure combustion variant. Full-EV BMWs keep the inverter and BMS locked, so traditional chip tuning does not apply.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The BMW premium segment is a high-output platform with Stage 2 potential. The hardware headroom allows a confident move to Stage 1 without changing the turbo. High-output engines deliver a solid gain with Stage 1 on stock hardware.
The gearbox comes in versions by torque class, so its tolerance depends on the engine. BMW's main gearbox is a modern multi-speed automatic. Mini and FWD compacts use a different TCU platform with its own tooling base.
Frequently asked questions
How much horsepower does Stage 1 add for the BMW X5 40e 313 hp?
Stage 1 chip tuning on the BMW X5 40e 313 hp boosts engine output by 37 hp: from 313 to 350 hp. Torque rises from 450 to 530 Nm (+80 Nm).
What changes in the BMW X5 ECU after Stage 1?
Stage 1 chip tuning of the BMW X5 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +37 hp with no hardware changes.
Is Stage 1 safe on the high-output BMW X5 40e 313 hp?
Stage 1 on the powerful BMW X5 40e 313 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the BMW X5?
Stage 2 for the BMW X5 40e 313 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECUs are found on the BMW X5 40e 313 hp?
The BMW X5 40e 313 hp was fitted with different ECUs depending on the year and trim: Bosch MEVD17.2.4, Bosch MEVD17.2.9. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HPxx TCU calibrated together with Stage 1?
Yes, on the BMW X5 40e 313 hp the ZF 8HPxx TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the BMW X5 warranty after chip tuning?
The factory warranty of the BMW X5 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the BMW X5 take?
On the BMW X5 40e 313 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the BMW X5?
Yes, the original ECU firmware of the BMW X5 40e 313 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the BMW X5?
Stage 1 for the BMW X5 40e 313 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.