BMW X5 50i 407 hp — Stage 1 file (+63 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for BMW X5 50i 407 hp ECU

BMW X5 (2010 - E70-LCI) 50i 407 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 407 to 470 hp (+63 hp, +15%) and torque from 600 to 710 Nm (+110 Nm). ECU — Siemens/Continental MSD85. Flashing method: OBD or Bench depending on the unit's protection. The ZF 6HP EGS TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.

The BMW community is one of the most active in Europe for chip tuning. A well-known base once hardware is added (downpipe + intake + intercooler).

On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler).

BMW's main gearbox is a modern multi-speed automatic. The gearbox comes in versions by torque class, so its tolerance depends on the engine. The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain.

Frequently asked questions

How many horsepower does the BMW X5 50i 407 hp reach after a remap?

The Stage 1 gain for the BMW X5 50i 407 hp is 63 hp (+15%) over the stock 407 hp, for a total of 470 hp. Torque rises from 600 to 710 Nm (+110 Nm).

What is Stage 1 chip tuning for the BMW X5?

Stage 1 on the BMW X5 50i 407 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +63 hp with no hardware changes.

What does Stage 1 give on the top-spec BMW X5 50i 407 hp?

Stage 1 for the BMW X5 50i 407 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.

How does Stage 2 differ from Stage 1 on the BMW X5 50i 407 hp?

Stage 2 on the BMW X5 50i 407 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What control unit does the BMW X5 50i 407 hp run?

The control unit of the BMW X5 50i 407 hp is the Siemens/Continental MSD85. Before flashing, the engineer identifies the exact revision and selects the write method.

Does the ZF 6HP EGS transmission need calibration after Stage 1 on the BMW X5?

Remapping the ZF 6HP EGS gearbox is essential to fully unlock Stage 1 on the BMW X5 50i 407 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.

Does Stage 1 void the warranty on the BMW X5?

Stage 1 on the BMW X5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the BMW X5 50i 407 hp done?

The full remap cycle for the BMW X5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the BMW X5?

The original BMW X5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the BMW X5 50i 407 hp?

The cost of Stage 1 for the BMW X5 50i 407 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno