BMW X4 M40i 374 hp — Stage 1 file (+46 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for BMW X4 M40i 374 hp ECU

BMW X4 (2018 - G02) M40i 374 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 374 to 420 hp (+46 hp, +12%) and torque from 500 to 580 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MG1CS003, Bosch MG1CS201. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: ZF 8HPxx, ZF 8HPxx-Gen3 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.

The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. M GmbH is BMW's performance division, building high-output top engines since 1972.

Protection on top BMW models is the toughest in the group and requires Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant.

Top BMW models use a reinforced gearbox version that handles significant stock torque. The gearbox comes in versions by torque class, so its tolerance depends on the engine. Mini and FWD compacts use a different TCU platform with its own tooling base.

Frequently asked questions

What is the Stage 1 effect on the BMW X4 M40i 374 hp?

The Stage 1 gain for the BMW X4 M40i 374 hp is 46 hp (+12%) over the stock 374 hp, for a total of 420 hp. Torque rises from 500 to 580 Nm (+80 Nm).

What is Stage 1 chip tuning for the BMW X4?

Stage 1 chip tuning of the BMW X4 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +46 hp with no hardware changes.

What is the Stage 1 potential of the BMW X4 M40i 374 hp?

Stage 1 for the BMW X4 M40i 374 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.

How much does Stage 2 add on the BMW X4?

Stage 2 on the BMW X4 M40i 374 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Which ECUs are found on the BMW X4 M40i 374 hp?

The BMW X4 M40i 374 hp was fitted with different ECUs depending on the year and trim: Bosch MG1CS003, Bosch MG1CS201. The write method (OBD, Bench, Boot) is determined when the unit is read.

How many TCU units does the BMW X4 M40i 374 hp have?

The BMW X4 M40i 374 hp comes with 2 different automatic-transmission TCU units: ZF 8HPxx, ZF 8HPxx-Gen3. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.

What happens to the BMW X4 warranty after chip tuning?

The factory warranty of the BMW X4 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.

How long does remapping the BMW X4 take?

On the BMW X4 M40i 374 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.

Is the original file kept when chip tuning the BMW X4?

Yes, the original ECU firmware of the BMW X4 M40i 374 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.

What is the price of a Stage 1 remap for the BMW X4?

Stage 1 for the BMW X4 M40i 374 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno