BMW X1 28i (2.0T) EU6d 231 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for BMW X1 28i (2.0T) EU6d 231 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW X1 28i (2.0T) EU6d 231 hp ECU
BMW X1 (2015 - F48) 28i (2.0T) EU6d 231 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 231 to 266 hp (+35 hp, +15%) and torque from 300 to 360 Nm (+60 Nm). ECU — Bosch MG1CS201. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
BMW's slogan is “Sheer Driving Pleasure”. The factory calibration on BMW petrol engines is conservative, leaving headroom for Stage 1 without hardware changes. Mid-generation petrol models use standard OBD flash. Third-party flash platforms are an industry of their own for the BMW community.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. High-output engines deliver a solid gain with Stage 1 on stock hardware. The BMW premium segment is a high-output platform with Stage 2 potential. The hardware headroom allows a confident move to Stage 1 without changing the turbo.
Frequently asked questions
How much does the power of the BMW X1 28i (2.0T) EU6d 231 hp increase after Stage 1?
The Stage 1 gain for the BMW X1 28i (2.0T) EU6d 231 hp is 35 hp (+15%) over the stock 231 hp, for a total of 266 hp. Torque rises from 300 to 360 Nm (+60 Nm).
What is Stage 1 chip tuning for the BMW X1?
Stage 1 is a software optimization of the factory ECU firmware of the BMW X1 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the BMW X1?
The high-output BMW X1 28i (2.0T) EU6d 231 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the BMW X1 28i (2.0T) EU6d 231 hp?
Stage 2 on the BMW X1 28i (2.0T) EU6d 231 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the BMW X1 28i (2.0T) EU6d 231 hp use?
The BMW X1 28i (2.0T) EU6d 231 hp is fitted with the Bosch MG1CS201 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the BMW X1 remain valid after Stage 1?
After remapping the BMW X1, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW X1?
Reading and writing via OBD takes 25-30 minutes on the BMW X1. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW X1?
Before Stage 1 the original of the BMW X1 28i (2.0T) EU6d 231 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW X1 28i (2.0T) EU6d 231 hp cost?
The remap price for the BMW X1 28i (2.0T) EU6d 231 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.