BMW X1 28i 245 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for BMW X1 28i 245 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW X1 28i 245 hp ECU
BMW X1 (2009 - E84) 28i 245 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 245 to 280 hp (+35 hp, +14%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.4, Bosch MEVD17.2.9. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2009 — the era before widespread firmware encryption, OBD flash without complications.
BMW has always emphasised driver engagement — a signature trait of the brand. On older-generation BMW petrol engines, Stage 1 goes in over OBD without Bench. Third-party flash platforms are an industry of their own for the BMW community. High-output BMW turbo petrol engines deliver a solid gain with Stage 1 on stock hardware.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. High-output engines deliver a solid gain with Stage 1 on stock hardware. The BMW premium segment is a high-output platform with Stage 2 potential. The hardware headroom allows a confident move to Stage 1 without changing the turbo.
The gearbox comes in versions by torque class, so its tolerance depends on the engine. BMW's main gearbox is a modern multi-speed automatic. Mini and FWD compacts use a different TCU platform with its own tooling base.
Frequently asked questions
What is the Stage 1 effect on the BMW X1 28i 245 hp?
Stage 1 chip tuning on the BMW X1 28i 245 hp boosts engine output by 35 hp: from 245 to 280 hp. Torque rises from 350 to 420 Nm (+70 Nm).
What changes in the BMW X1 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the BMW X1 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the BMW X1?
Stage 1 on the powerful BMW X1 28i 245 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the BMW X1 28i 245 hp?
Stage 2 for the BMW X1 28i 245 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the BMW X1 28i 245 hp built with?
The BMW X1 28i 245 hp comes with 2 ECU variants: Bosch MEVD17.2.4, Bosch MEVD17.2.9. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the BMW X1 28i 245 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW X1 remain valid after Stage 1?
After remapping the BMW X1, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW X1?
Reading and writing via OBD takes 25-30 minutes on the BMW X1. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW X1?
Before Stage 1 the original of the BMW X1 28i 245 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW X1 28i 245 hp cost?
The remap price for the BMW X1 28i 245 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.