BMW M6 4.4 (M) (2011) 600 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for BMW M6 4.4 (M) (2011) 600 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW M6 4.4 (M) (2011) 600 hp ECU
BMW M6 (2012 - F13) 4.4 (M) (2011) 600 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 600 to 680 hp (+80 hp, +13%) and torque from 700 to 850 Nm (+150 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.8, Bosch MEVD17.2.H. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The Temic DKG436 gen1 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2012 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
BMW's slogan is “Sheer Driving Pleasure”. Mid-generation petrol models use standard OBD flash.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.
Top BMW models use a reinforced gearbox version that handles significant stock torque. Older BMW M models use a dual-clutch automated gearbox. BMW's main gearbox is a modern multi-speed automatic.
Frequently asked questions
What power gain do you get after chip tuning the BMW M6 4.4 (M) (2011) 600 hp?
The Stage 1 gain for the BMW M6 4.4 (M) (2011) 600 hp is 80 hp (+13%) over the stock 600 hp, for a total of 680 hp. Torque rises from 700 to 850 Nm (+150 Nm).
What is Stage 1 chip tuning for the BMW M6?
Stage 1 is a software optimization of the factory ECU firmware of the BMW M6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Does Stage 1 make sense on the BMW M6 4.4 (M) (2011) 600 hp with this much power?
Stage 1 for the BMW M6 4.4 (M) (2011) 600 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the BMW M6 4.4 (M) (2011) 600 hp?
Stage 2 on the BMW M6 4.4 (M) (2011) 600 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the BMW M6 4.4 (M) (2011) 600 hp built with?
The BMW M6 4.4 (M) (2011) 600 hp comes with 2 ECU variants: Bosch MEVD17.2.8, Bosch MEVD17.2.H. Calibration is done for the specific unit after the revision is identified.
What does remapping the Temic DKG436 gen1 gearbox give on the BMW M6 4.4 (M) (2011) 600 hp?
The Temic DKG436 gen1 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW M6 remain valid after Stage 1?
After remapping the BMW M6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW M6?
Reading and writing via OBD takes 25-30 minutes on the BMW M6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW M6?
Before Stage 1 the original of the BMW M6 4.4 (M) (2011) 600 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW M6 4.4 (M) (2011) 600 hp cost?
The remap price for the BMW M6 4.4 (M) (2011) 600 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.